Set of 28 pcs consists of:

• Sets of metric hand taps DIN 352- M3 + M4 + M5 + M6 + M8 + M10 + M12
• HSS drill bit for metal DIN 338 fully ground- 2,5 + 3,3 + 4,2 + 5,0 + 6,8 + 8,5 + 10,2 mm

HSS drill bits design:

• DIN 338, Type N
• higher quality drill bit for drilling metal
• the tip is cross-cut from a diameter of 2.0 mm - better drilling, it does not require punching
• silver finish

Sets of metric hand taps design:

• ground
• right-handed
• tolerance ISO 2/6 H

Set: consists of 3 taps

• 1 (pre-cutting): cutting cone 5 - 6 threads
• 2 (medium): cutting cone 4-5 threads
• 3 (finishing): cutting cone 2-3 threads

Application: for through and blind threads in steel with a strength of max. 800 N/mm²

Note: When cutting threads, use cutting paste or threaded oil

Used in: alloy steel, non-alloy steel, iron, cast iron, non-ferrous metals

Packed in: Plastic box