Combination Tap Drills with 1/4" Hex Shank
from 12.10 €
from 10 € without VAT
in stock
5301
Drilling, tapping and chamfering in one step
- Thread cutting
- Combined Tool
Combined Tool
Drill Tap Bits
Drill tap bits combine drilling the hole, cutting the thread and chamfering the edge in one tool. They are suitable for fast work where you want to prepare a thread without changing from drill bit to tap and back again.
When to choose a drill tap bit
Choose a drill tap bit for quickly creating a thread in one working step, for example during installation or repair work where saving time is important. It is suitable for steel, non-ferrous metals and plastics, and thanks to the 1/4" shank it can be used in standard cordless tools.
What you will find in this category
Here you will find drill tap bits with 1/4" shank, which drill the hole, cut the thread and chamfer the edge in a single operation. They are practical where you do not need to work separately with a drill bit, tap and countersink.
Do you want to cut the thread using the classic method?
If you want to pre-drill the hole first and then cut the thread with a separate tool, choose hand taps or machine taps according to the working method. For external threads, use thread dies.
You will find specific sizes of drill tap bits with 1/4" shank in the product group below on this page.