-
from 32.67 €
-
The necessary addition to the VARIANT Drilling Star, ensuring its correct guidance into the material
- from 27 € without VAT
- Concrete, masonry, stone, plasterboard drilling
- Variable driling system VARIANT
- Pilot drill for drilling star VARIANT, short
Pilot drill for drilling star VARIANT, short
A necessary addition to the VARIANT Drilling Star, ensuring its correct guidance into the material
- Your price with VAT:
- 32.67 € VAT 21%
- Your price without VAT:
- 27 €
- Availability:
- in stock
-
pc
- BUY
- Producer:
- OREN
- Product code:
- 2006-1
- Weight:
- 0.154 kg
- EAN:
- 8595172002966
Product description
Pilot bits VARIANT for drilling star
This pilot bit is an essential part of the VARIANT drilling set if its main drilling part is a Star.
The pilot bit ensures the correct guidance of the Star into the material.
- The shorter version is suitable for vertical drilling of solid materials.
- If you need to drill in corners, at an angle or in uneven material, use the longer drill.
Pay attention to the correct procedure of the drill bit assembly:
- Before mounting, clean the threads and if necessary, spread a thin layer of VARIANT grease.
- Screw the pilot bit into the Star as far as it will go, then screw the thread of the pilot bit into the VARIANT flute body. Then tight the Star to the flute body.
- Make sure that the Star and the flute budy do not act as a lock nut on the pilot bit.
Do not confuse with the VARIANT pilot bit designed for a hollow hammer core bit VARIANT.
Packed in: tubes for hanging
Product Parameters
Dimensions
- Diameter:
- 18 mm
- Working length:
- 50 mm
- Total length:
- 125 mm
Product group´s parameters:
- Use in material:
- Concrete, masonry, stone
- Designed for:
- rotary hammers SDS-max
- Type of shank:
- thread VARIANT