SDS-max Breakthrough Drill Bits
from 174.24 €
from 144 € without VAT
in stock
1832
Complete drill bits for instant creation of deep penetrations.
NEW PRODUCTS
In this section you will find all the goods that we have added to our range in recent months and are not yet listed in the printed catalog.
-
-
Short roll-forged metal drill bits DIN 1897, HSS
from 0.63 €
from 0.52 € without VAT
price for pc
in stock
3510
Economical design for shallow metal drilling where working space is limited.
-
Rivet drill bits for sheet metal
from 0.97 €
from 0.80 € without VAT
price for pc
in stock
3615
Short ground drill bits for handheld drilling in thin sheet metal and for rivet holes.
-
HSS-G Step Tip TiN Metal Drill Bits
from 0.39 €
from 0.32 € without VAT
in stock
3620ST
DIN 338 - stepped point enables drilling without gradual pilot drilling.
-
HSS-Co Reduced Shank Cobalt Drill Bits
from 42.35 €
from 35 € without VAT
in stock
3770
DIN 338 - Larger cobalt drill bit diameters for use in standard handheld and cordless drills.
-
HSS-Co Cobalt Step-Tip TiN Metal Drill Bits
from 0.48 €
from 0.40 € without VAT
in stock
3720ST
DIN 338 - Stainless steel drilling without the need for gradual pilot drilling.
-
Long-Series HSS Drill Bits with Morse Taper
from 31.46 €
from 26 € without VAT
price for pc
within 1 week
3661
DIN 341 – for deeper holes and drilling through drill bushings.
-
HSS-Co8 Drill Bits with Morse Taper for Hardox and Manganese Steel
from 113.74 €
from 94 € without VAT
price for pc
within 1 week
3960
Special 130° cutting edge for drilling very tough steels.
-
Carbide-Tipped Drill Bits with Morse Taper
from 143.99 €
from 119 € without VAT
price for pc
within 1 week
3160
DIN 8041 – for spring steel, hard cast iron and abrasive materials.
-
Extra-short cobalt drill bits DIN 1897
from 0.73 €
from 0.60 € without VAT
price for pc
in stock
3710
Stable and accurate drilling thanks to the short design.
-
Cobalt NC spot drills 90°
from 5.81 €
from 4.80 € without VAT
within 1 week
3000
HSS-Co 5% for accurate spotting and preparing a 90° chamfer around the subsequent hole.
-
HSS-Co NC spotting drills 90° with Weldon shank
from 12.58 €
from 10.40 € without VAT
price for pc
within 1 week
3010
For precise spotting and 90° countersinking.
-
Cobalt NC spot drills 120°
from 5.81 €
from 4.80 € without VAT
within 1 week
3020
HSS-Co 5% for accurate guidance of standard twist drills with a 118° point angle.
-
HSS-Co NC spotting drills 120° with Weldon shank
from 12.58 €
from 10.40 € without VAT
price for pc
within 1 week
3030
For guiding drill bits with a 118° point.
-
Spot Weld Drill Bits, TiCN
from 16.09 €
from 13.30 € without VAT
price for pc
within 1 week
3784
Wear-resistant coated design for frequent spot-weld removal.
-
Boring Bits with Depth Stop
-
Hollow Chisel Mortising Bits
from 13.31 €
from 11 € without VAT
in stock
4840
For making square mortises in wood; with an adapter also usable in drill presses.
-
Adapter for Hollow Chisel Mortising Bits
39.93 €
33 € without VAT
price for pc
in stock
4840-A
Allows hollow chisel mortising bits to be used in bench or pillar drills.
-
HSS annular cutters with Weldon shank
from 33.88 €
from 28 € without VAT
price for pc
within 1 week
5430
30 mm cutting depth. For larger holes in metal using a magnetic drill.
-
Ejector pins for annular cutters with Weldon shank
from 4.48 €
from 3.70 € without VAT
price for pc
within 1 week
5431
For ejecting the slug from an annular cutter.
-
2-Flute Slot End Mills DIN 327
from 24.20 €
from 20 € without VAT
price for pc
69100T
For slot milling and axial engagement into solid material.
-
Universal End Mills DIN 844, Type N
from 29.04 €
from 24 € without VAT
price for pc
69300T
For general milling of edges, surfaces and shoulders in steel.
-
Roughing End Mills DIN 844, Type NR
from 58.08 €
from 48 € without VAT
price for pc
69400T
For rapid material removal before finishing.
-
End Mills for Aluminium DIN 844, Type W
from 23.23 €
from 19.20 € without VAT
price for pc
69600
For milling aluminium and soft non-ferrous materials.
-
Thread Repair Kits
from 41.14 €
from 34 € without VAT
in stock
366110
Thread repair kits for restoring damaged threads without switching to a larger screw size.
-
Thread inserts
from 0.38 €
from 0.31 € without VAT
in stock
366115
For fast and reliable repair of damaged or stripped threads.
-
Universal Clamping Adapter with Quick Change System
31.46 €
26 € without VAT
price for pc
in stock
5102-8
Enables quick replacement of bi-metal and carbide hole saws with the Quick Change system.
-
SDS-plus Tri-Cut PRO Drill Bit Set OREN (7 pcs)
38.72 €
32 € without VAT
price for pc
in stock
991600-7TC
Practical SDS-plus drill bit set (7 pcs, 5-12 mm) for drilling into concrete, masonry and stone.
-
OREN HSS Roll-Forged Drill Bits with Reduced Shank 13 mm, Set of 10, Metal Case
169.40 €
140 € without VAT
price for set
in stock
993570-10
Contains larger-diameter drill bits with a reduced 13 mm shank for use in a standard drill chuck.
-
HSS-G Ground Drill Bit Set DIN 338, 24 pcs, 1–10.5 mm by 0.5 mm + Taps (Rose Plastic Case)
79.86 €
66 € without VAT
price for set
in stock
993620-24P
Contains drill bits 1-10.5 mm in 0.5 mm increments + diameters 3.3 / 4.2 / 6.8 / 10.2; the ground de...
-
HSS-G Ground Drill Bit Set DIN 338, 41 pcs, 1–10 mm by 0.1 mm (Rose Plastic Case)
199.65 €
165 € without VAT
price for set
in stock
993620-41P
Contains drill bits 6-10 mm in 0.1 mm increments; the ground design is suitable for more precise, fr...
-
HSS-G Ground Drill Bit Set DIN 338, 50 pcs, 1–5.9 mm by 0.1 mm (Rose Plastic Case)
64.13 €
53 € without VAT
price for set
in stock
993620-50P
Contains drill bits 1-5.9 mm in 0.1 mm increments; the ground design is suitable for more precise, f...
-
HSS-G Step-Tip Drill Bit Set DIN 338, 19 pcs, 1–10 mm by 0.5 mm
145.20 €
120 € without VAT
price for set
in stock
993620-19ST
Contains drill bits 1-10 mm in 0.5 mm increments; the Step-Tip design is suitable for precise drilli...
-
HSS-G Step-Tip Drill Bit Set DIN 338, 24 pcs, 1–10.5 mm by 0.5 mm
205.70 €
170 € without VAT
price for set
in stock
993620-24ST
Contains drill bits 1-10.5 mm in 0.5 mm increments + diameters 3.3 / 4.2 / 6.8 / 10.2; the Step-Tip ...
-
HSS-G Step-Tip Drill Bit Set DIN 338, 5 pcs, 4.5 / 5 / 6.8 / 8 / 10 mm
48.40 €
40 € without VAT
price for set
in stock
993620-5ST
Contains diameters 4, 5, 6, 8 and 10 mm; Step-Tip makes precise drilling easier without pre-drilling...
-
HSS-Co Drill Bit Set OREN DIN 338, 24 pcs, 1–10.5 mm by 0.5 mm + Taps (Rose Plastic Case)
117.37 €
97 € without VAT
price for set
in stock
993720-24P
Contains drill bits 1-10.5 mm in 0.5 mm increments + diameters 3.3 / 4.2 / 6.8 / 10.2; the cobalt de...
-
HSS-Co Drill Bit Set OREN DIN 338, 50 pcs, 1–5.9 mm by 0.1 mm (Rose Plastic Case)
101.64 €
84 € without VAT
price for set
in stock
993720-50P
Contains drill bits 1-5.9 mm in 0.1 mm increments; the cobalt design is suitable for stainless steel...
-
HSS-Co Drill Bit Set OREN DIN 338, 41 pcs, 1–10 mm by 0.1 mm (Rose Plastic Case)
319.44 €
264 € without VAT
price for set
in stock
993720-41P
Contains drill bits 6-10 mm in 0.1 mm increments; the cobalt design is suitable for stainless steel,...
-
HSS-Co Drill Bit Set OREN DIN 338, 29 pcs, 1–13 mm by 0.5 mm + Taps (Rose Plastic Case)
157.30 €
130 € without VAT
price for set
in stock
993720-29P
Contains drill bits 1-13 mm in 0.5 mm increments + diameters 3.3 / 4.2 / 6.8 / 10.2; the cobalt desi...
-
HSS-Co Step-Tip Drill Bit Set DIN 338, 25 pcs, 1–13 mm by 0.5 mm
308.55 €
255 € without VAT
price for set
out of stock
993720-25ST
Contains drill bits 1-13 mm in 0.5 mm increments; Step-Tip cobalt makes precise drilling easier with...
-
HSS-Co Step-Tip Drill Bit Set DIN 338, 24 pcs, 1–10.5 mm by 0.5 mm + Taps
225.06 €
186 € without VAT
price for set
in stock
993720-24ST
Contains drill bits 1-10.5 mm in 0.5 mm increments + diameters 3.3 / 4.2 / 6.8 / 10.2; the Step-Tip ...
-
HSS-Co Step-Tip Drill Bit Set DIN 338, 29 pcs, 1–13 mm by 0.5 mm + Taps
326.70 €
270 € without VAT
price for set
out of stock
993720-29ST
Contains drill bits 1-13 mm in 0.5 mm increments + diameters 3.3 / 4.2 / 6.8 / 10.2; Step-Tip cobalt...
-
HSS-Co Step-Tip Drill Bit Set, 5 pcs, 4.5 / 5 / 6.8 / 8 / 10 mm
54.45 €
45 € without VAT
price for set
in stock
993720-5ST
Contains diameters 4, 5, 6, 8 and 10 mm; Step-Tip cobalt makes precise drilling easier without pre-d...
-
OREN HSS-Co5 extra-short cobalt drill bit set DIN 1897, 19 pcs, 1.0-10.0 mm, metal case
98.01 €
81 € without VAT
price for pc
out of stock
993710-19
Covers 1.0-10.0 mm in 0.5 mm increments for shallow drilling in stainless and higher-strength steels...
-
OREN HSS-Co5 extra-short cobalt drill bit set DIN 1897, 25 pcs, 1.0-13.0 mm, metal case
205.70 €
170 € without VAT
price for pc
out of stock
993710-25
Covers 1.0-13.0 mm in 0.5 mm increments for shallow drilling in stainless and higher-strength steels...
-
Boring bits OREN with depth adjustment in set - 5 pcs.
