How to choose the right bimetal hole saw for wood

Our range includes bimetal hole saws made from HSS high-speed steel. HSS hole saws are particularly suitable for drilling wood and wood-based panels.

You can choose from a wide range of sizes, from 14 mm up to 200 mm.

Selecting the correct arbor is also important. Arbors are chosen according to the hole saw diameter. Different arbors are designed for hole saws up to 30 mm and for hole saws above 30 mm. Within each group, various shank types are available. The pilot drill bit, which helps ensure accurate positioning, is already included with the arbor.

For deeper drilling applications, an extension can be useful, while an ejector spring helps remove the cut material more easily. If you regularly use different diameters, bimetal hole saw sets can be a practical option.

Where and how bimetal hole saws for wood are used

Bimetal hole saws are used whenever you need to create large-diameter holes in wood or wood-based panels. Typical applications include drilling holes in furniture components, shelving, worktops, plywood, chipboard, and other sheet materials.

They are also widely used for installation and fitting work where openings are required for cables, pipes, hoses, or other service lines. Depending on the application, they can also be used for plastics and drywall.

How to work with bimetal hole saws for wood

When drilling, guide the tool steadily and adjust your working technique to the material being drilled. Start smoothly without applying excessive pressure and allow the hole saw to cut progressively around the circumference of the hole. The pilot drill bit helps ensure accurate positioning at the start of drilling.

The workpiece should be securely fixed in place to prevent movement when the hole saw engages the material. When working with sheet materials, plastics, or drywall, maintain a smooth cutting action and avoid tearing, overheating, or damaging the material.

Adjust the drilling speed according to both the hole saw diameter and the material being drilled. As a general rule, larger diameter hole saws require lower speeds. Excessively high speeds can cause overheating, burning smells, material discolouration, or scorched hole edges. Speeds that are too low may result in rough cutting, uneven engagement, and the need to apply excessive pressure.

For best results, use the correct combination of hole saw, arbor, and accessories. This helps maintain smooth drilling performance and provides better control over the finished result.

How is the product range further divided?

In this subcategory, bimetal hole saws are selected primarily according to the required hole diameter. A range of accessories is also available to ensure proper mounting, accurate guidance, and easier operation.

• HSS Bimetal Hole Saws
  The standard choice for drilling large-diameter holes in wood, wood-based panels, plastics, and drywall.
• Drive adapters for Bimetal and Carbide-Tipped Hole Saws
  Used to mount the hole saw in the power tool. Selected according to the hole saw diameter and shank type.
• Quick Change Adapters for Hole Saws
  Allow faster hole saw changes when using a compatible quick-change mounting system.
• Pilot Drill Bits
  Help guide the hole saw accurately at the start of drilling. Pilot drill bits are already included with arbors and are mainly available separately as replacement parts.
• Ejector Springs
  Make it easier to remove the cut-out material from the hole saw.
• Extensions for Bimetal Hole Saws
  Useful when additional reach is required or when working in difficult-to-access locations.
• Bimetal Hole Saw Sets
  A practical choice if you want multiple diameters available in a single set for different drilling tasks.