2-Cutter SDS-plus Drill Bits
-20%
from 2.32 €
from 1.92 € without VAT
from 2.90 €
in stock
1400
2-cutter SDS-plus drill bits for fast drilling in concrete, masonry and stone.
2-cutter head
SDS-plus 2-Cutter head drill bits
SDS-plus 2-Cutter head drill bits are a practical choice for general drilling in concrete, masonry, stone and similar building materials. They are suitable for installing wall plugs, anchors and other applications where a good balance of price, performance and service life is important.
When to choose a 2-Cutter head drill bit
Choose a 2-Cutter head drill bit when you mainly drill in standard concrete or masonry and do not need a tool designed primarily for frequent contact with reinforcement. For most standard fixing holes, it is a simple and economical solution.
What you will find in this category
Here you will find individual SDS-plus 2-Cutter head drill bits in various diameters and lengths, as well as value packs for the most commonly used sizes.
Working with harder concrete or possible reinforcement?
If you often encounter hard reinforced concrete or reinforcement during work, also take a look at other types of SDS-plus drill bits. 4-Cutter head drill bits or special TriCut drill bits may be more suitable for this type of application.
You will find more detailed technical information directly in the SDS-plus 2-Cutter head drill bits product group further down the page.
-
-
2-Cutter SDS-plus Drill Bits - Value Pack
-20%
from 2.32 €
from 1.92 € without VAT
from 2.90 €
in stock
A1400
Cost-effective packs of the most commonly used 2-cutter SDS-plus drill bits.