• for bi-metal hole saws and TCT hole saws for wood and plastic
• the Quick Change system speeds up hole saw replacement during work
• use adapter 5107-1 for hole saws with 1/2" - 20 UNF thread
• use adapter 5107-2 for hole saws with 5/8" - 18 UNF thread
• the adapter is supplied with two adapters and a pilot bit

The adapter is suitable for work where you often change hole saw diameters. The adapter remains screwed into the hole saw and you then snap the hole saw onto the universal adapter.

• use with bi-metal hole saws 5101 and 5501
• use with TCT hole saws for wood and plastic 5201
• quick replacement of smaller and larger hole saw diameters

• product type: universal Quick Change clamping adapter
• machine shank: hex 11 mm
• transition to hole saws: 1/2" - 20 UNF or 5/8" - 18 UNF thread according to the adapter used
• follow-up adapters: 5107-1 for hole saws up to 30 mm, 5107-2 for hole saws from 32 mm
• included in delivery: two adapters and a pilot bit
• packaging: plastic hanging pack

For standard hole saws up to 30 mm, use adapter 5107-1; for hole saws from 32 mm, use adapter 5107-2.

The Quick Change adapter is supplied with a pilot bit. When replacing the pilot bit, check compatibility according to the Quick Change system used.

Practical information on working with bi-metal hole saws can be found in the category Core drills for plasterboard; for carbide hole saws in the category TCT hole saws.