• made from HSS-Co 8%
• cutting depth 35 mm
• variable tooth pitch
• for use with a suitable arbor
• plastic case
• hole saws in the set: 19 + 22 + 29 + 35 + 38 + 44 + 51 + 57 + 64 mm
• arbor for hole saws 14-30 mm
• arbor for hole saws 32-200 mm
• pilot drill bit 70 mm

• drilling into metal
• use in stainless steel, Hardox and other listed metal materials
• work with cordless screwdrivers, hand drills or pillar drills depending on the adapter used
• material use: metals with strength above 700 N/mm2, stainless steel and Hardox up to 1000 N/mm2; also alloyed and unalloyed steels up to 1400 N/mm2, steels with high chromium content, acid-resistant steel, non-ferrous materials and light metals

• hole saw material/range: HSS-Co 8%
• hole saws in the set: 19 + 22 + 29 + 35 + 38 + 44 + 51 + 57 + 64 mm
• cutting depth: 35 mm
• tooth: variable tooth pitch
• hole saw thread up to 30 mm diameter: 1/2" - 20 UNF
• hole saw thread from 32 mm diameter: 5/8" - 18 UNF
• arbor for hole saws: 14-30 mm
• arbor for hole saws: 32-200 mm
• pilot drill bit: 70 mm

• When drilling, observe the recommended speeds according to the speed table.
• When drilling into metal, use a coolant such as cutting oil or emulsion.
• For plasterboard, wood and similar materials, HSS hole saws are more suitable.
• The case is suitable when you want to keep several commonly used diameters and arbors together.

Practical information on working with these tools can be found in the category Bi-metal hole saws.