• for HSS bi-metal hole saws 5101, HSS-Co bi-metal hole saws 5501 and TCT hole saws for wood and plastic 5201
• for hole saws 14-30 mm
• thread for hole saw: 1/2" - 20 UNF
• drive end for machine: hex 9,5 mm
• the adapter is supplied with a pilot bit

Select the adapter according to the hole saw diameter, hole saw thread and the type of tool you will use.

• for smaller or larger hole saws according to the range 14-30 mm
• for work in small hand drills and cordless screwdrivers with a chuck up to 10 mm
• for bi-metal hole saws for plasterboard, wood, plastics and other materials according to the specific hole saw
• for TCT hole saws for wood and plastic

• intended hole saws: 14-30 mm
• thread for hole saw: 1/2" - 20 UNF
• machine shank: hex 9,5 mm
• included in delivery: pilot bit
• packaging: plastic tube with hanger

Compatible hole saws: HSS bi-metal hole saws 5101, HSS-Co bi-metal hole saws 5501 and TCT hole saws for wood and plastic 5201.

When used with a bi-metal hole saw, purchase 5103-70 if needed; when used with a TCT hole saw for wood and plastic, purchase 5203-95.

For hole saws up to 30 mm, the thread is 1/2" - 20 UNF. For hole saws from 32 mm, the thread is 5/8" - 18 UNF.

Practical information on working with bi-metal hole saws can be found in the category Core drills for plasterboard; for carbide hole saws in the category TCT hole saws.