HOW TO DRILL A LAMINATED BOARD WITHOUT CAUSING DAMAGE

Drilling into laminated boards requires the right technique to prevent chipping of the surface or damage to the material. Whether you are drilling a worktop, a furniture panel, or another laminated material, using the right drill bit and proper drilling technique will help you create a clean and accurate hole.

Which drill bit for laminated boards?

For drilling into laminated boards, we recommend OREN Step Tip drill bits, Series 3620-ST. Their step-point tip ensures precise positioning in the material, reduces slipping on smooth surfaces, and helps produce clean holes without damaging the laminate. They are especially suitable for visible holes in furniture, worktops, and other laminated materials.

How to drill into laminated boards

For the best results, follow these simple guidelines:

• mark the drilling position,
• cover the surface with masking tape,
• support the underside of the board with a piece of scrap wood,
• drill at a lower speed without applying excessive pressure,
• reduce the pressure even further just before the drill bit breaks through the material.

Most common mistakes when drilling laminated boards

The most common causes of damage are using a dull drill bit, applying too much pressure, or failing to support the board properly. If you are drilling visible holes, we recommend testing the procedure first on a leftover piece of the same material.

Summary

If you're wondering how to drill into laminate without causing damage, the key is to use a sharp drill bit, support the material firmly, and drill steadily without unnecessary pressure. With the right technique, you will achieve clean holes while preserving the flawless appearance of the laminated board.